P0018Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor A)
Вось што азначае код няспраўнасці P0018, чаму ён узнікае і што з гэтым рабіць.
Сістэма: Camshaft / crankshaft timing correlation
Пазбягайце паездак — гэтая няспраўнасць можа быць небяспечнай або прывесці да большых пашкоджанняў. Праверце адразу.
Што азначае P0018
The computer compared the crankshaft position signal to the bank 2 intake camshaft position signal and found they do not align correctly. The intake camshaft on bank 2 is out of sync with the crankshaft, commonly from a stretched timing chain, a VVT fault, or a sensor problem. Severe misalignment can risk engine damage.
Частыя сімптомы
- Check engine light on
- Rough idle or rough running
- Hard starting or extended cranking
- Timing chain rattle, often on start-up
- Loss of power
- Possible stalling
Частыя прычыны
Пералічаны ад найбольш да найменш частых.
- 1Stretched or worn timing chain, guides, or tensioner
- 2Faulty camshaft or crankshaft position sensor
- 3Stuck or faulty VVT/cam actuator from low or dirty oil
- 4Clogged oil passages to the cam phaser
- 5Damaged reluctor/tone wheel
- 6Wiring or connector faults
Што рабіць
Have it diagnosed promptly, as a misaligned timing chain can cause serious engine damage if it skips or breaks. Check the oil first, but treat any rattle seriously. Minimize driving until a technician confirms the timing components are sound.
Купляеце аўтамабіль, на якім гарыць P0018?
Захаваны код няспраўнасці можа намякаць на схаваную праблему. Распазнайце VIN, каб убачыць звесткі пра аўтамабіль і афіцыйныя адкліканні па бяспецы — бясплатна.
Частыя пытанні
Што азначае код P0018?
The computer compared the crankshaft position signal to the bank 2 intake camshaft position signal and found they do not align correctly. The intake camshaft on bank 2 is out of sync with the crankshaft, commonly from a stretched timing chain, a VVT fault, or a sensor problem. Severe misalignment can risk engine damage.
Што выклікае код P0018?
Найбольш частыя прычыны: Stretched or worn timing chain, guides, or tensioner, Faulty camshaft or crankshaft position sensor, Stuck or faulty VVT/cam actuator from low or dirty oil, Clogged oil passages to the cam phaser, Damaged reluctor/tone wheel, Wiring or connector faults.
Ці бяспечна ехаць з P0018?
Пазбягайце паездак — гэтая няспраўнасць можа быць небяспечнай або прывесці да большых пашкоджанняў. Праверце адразу.
Як выправіць код P0018?
Have it diagnosed promptly, as a misaligned timing chain can cause serious engine damage if it skips or breaks. Check the oil first, but treat any rattle seriously. Minimize driving until a technician confirms the timing components are sound.
Гэта агульная інфармацыя, якая дапаможа вам зразумець код P0018, а не замена дыягностыцы кваліфікаваным механікам. Заўсёды пацвярджайце прычыну, перш чым мяняць дэталі.
Вызначэнні кодаў адпавядаюць стандартызаванаму спісу OBD-II (SAE J2012). CarVinVin незалежны і не звязаны ні з адным вытворцам.