P0135O2 Sensor Heater Circuit (Bank 1, Sensor 1)
Hier erfahren Sie, was der Fehlercode P0135 bedeutet, warum er auftritt und was Sie dagegen tun können.
System: Fuel & air metering
Kurze Strecken sind meist unbedenklich, lassen Sie es aber bald überprüfen.
Was P0135 bedeutet
There is a fault in the heater circuit of the upstream oxygen sensor on bank 1. Modern O2 sensors have a built-in heater so they reach operating temperature quickly; if the heater fails, the sensor takes too long to work and the computer cannot trust its readings early on. This is detected as abnormal heater current or resistance.
Häufige Symptome
- Check engine light on
- Slightly reduced fuel economy
- Longer time before closed-loop fueling after start
- Possible failed emissions test
- Usually no major driving symptoms
Häufige Ursachen
Sortiert von der häufigsten zur seltensten Ursache.
- 1Failed O2 sensor heater element (sensor replacement needed)
- 2Blown fuse for the O2 heater circuit
- 3Open or shorted heater wiring or connector
- 4Corroded sensor connector
- 5Loss of power or ground to the heater circuit
- 6Engine control module/driver fault (rare)
Was zu tun ist
It is generally safe to drive short distances. Check the O2 heater fuse and wiring first; if those are good, the sensor itself usually needs replacing. Fixing it restores proper warm-up and emissions performance.
Wollen Sie ein Auto kaufen, das P0135 anzeigt?
Ein gespeicherter Fehlercode kann auf ein verstecktes Problem hindeuten. Entschlüsseln Sie die VIN, um die Fahrzeugdaten und offizielle Sicherheitsrückrufe zu sehen — kostenlos.
Häufig gestellte Fragen
Was bedeutet der Code P0135?
There is a fault in the heater circuit of the upstream oxygen sensor on bank 1. Modern O2 sensors have a built-in heater so they reach operating temperature quickly; if the heater fails, the sensor takes too long to work and the computer cannot trust its readings early on. This is detected as abnormal heater current or resistance.
Was verursacht den Code P0135?
Die häufigsten Ursachen sind: Failed O2 sensor heater element (sensor replacement needed), Blown fuse for the O2 heater circuit, Open or shorted heater wiring or connector, Corroded sensor connector, Loss of power or ground to the heater circuit, Engine control module/driver fault (rare).
Ist die Weiterfahrt mit P0135 sicher?
Kurze Strecken sind meist unbedenklich, lassen Sie es aber bald überprüfen.
Wie behebt man den Code P0135?
It is generally safe to drive short distances. Check the O2 heater fuse and wiring first; if those are good, the sensor itself usually needs replacing. Fixing it restores proper warm-up and emissions performance.
Dies sind allgemeine Informationen, die Ihnen helfen, den Code P0135 zu verstehen, und kein Ersatz für eine Diagnose durch eine qualifizierte Werkstatt. Bestätigen Sie immer die Ursache, bevor Sie Teile austauschen.
Die Code-Definitionen folgen der standardisierten OBD-II-Liste (SAE J2012). CarVinVin ist unabhängig und mit keinem Hersteller verbunden.