P0018Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor A)
Oto co oznacza kod usterki P0018, dlaczego się pojawia i co z nim zrobić.
Układ: Camshaft / crankshaft timing correlation
Unikaj jazdy — ta usterka może być niebezpieczna lub prowadzić do większych uszkodzeń. Sprawdź to od razu.
Co oznacza P0018
The computer compared the crankshaft position signal to the bank 2 intake camshaft position signal and found they do not align correctly. The intake camshaft on bank 2 is out of sync with the crankshaft, commonly from a stretched timing chain, a VVT fault, or a sensor problem. Severe misalignment can risk engine damage.
Typowe objawy
- Check engine light on
- Rough idle or rough running
- Hard starting or extended cranking
- Timing chain rattle, often on start-up
- Loss of power
- Possible stalling
Typowe przyczyny
Uporządkowane od najczęstszych do najrzadszych.
- 1Stretched or worn timing chain, guides, or tensioner
- 2Faulty camshaft or crankshaft position sensor
- 3Stuck or faulty VVT/cam actuator from low or dirty oil
- 4Clogged oil passages to the cam phaser
- 5Damaged reluctor/tone wheel
- 6Wiring or connector faults
Co zrobić
Have it diagnosed promptly, as a misaligned timing chain can cause serious engine damage if it skips or breaks. Check the oil first, but treat any rattle seriously. Minimize driving until a technician confirms the timing components are sound.
Kupujesz auto z kodem P0018?
Zapisany kod usterki może wskazywać na ukryty problem. Zdekoduj VIN, aby bezpłatnie poznać dane auta i oficjalne akcje przywoławcze dotyczące bezpieczeństwa.
Najczęściej zadawane pytania
Co oznacza kod P0018?
The computer compared the crankshaft position signal to the bank 2 intake camshaft position signal and found they do not align correctly. The intake camshaft on bank 2 is out of sync with the crankshaft, commonly from a stretched timing chain, a VVT fault, or a sensor problem. Severe misalignment can risk engine damage.
Co powoduje kod P0018?
Najczęstsze przyczyny to: Stretched or worn timing chain, guides, or tensioner, Faulty camshaft or crankshaft position sensor, Stuck or faulty VVT/cam actuator from low or dirty oil, Clogged oil passages to the cam phaser, Damaged reluctor/tone wheel, Wiring or connector faults.
Czy można bezpiecznie jechać z P0018?
Unikaj jazdy — ta usterka może być niebezpieczna lub prowadzić do większych uszkodzeń. Sprawdź to od razu.
Jak naprawić kod P0018?
Have it diagnosed promptly, as a misaligned timing chain can cause serious engine damage if it skips or breaks. Check the oil first, but treat any rattle seriously. Minimize driving until a technician confirms the timing components are sound.
To ogólne informacje, które pomogą Ci zrozumieć kod P0018, a nie zastępstwo dla diagnostyki przez wykwalifikowanego mechanika. Zawsze potwierdź przyczynę, zanim wymienisz części.
Definicje kodów są zgodne ze znormalizowaną listą OBD-II (SAE J2012). CarVinVin jest niezależny i nie jest powiązany z żadnym producentem.