P0123Throttle/Pedal Position Sensor/Switch "A" Circuit High
Oto co oznacza kod usterki P0123, dlaczego się pojawia i co z nim zrobić.
Układ: Fuel & air metering
Zwykle można bezpiecznie przejechać krótki dystans, ale jak najszybciej zleć to sprawdzić.
Co oznacza P0123
The voltage on the throttle or pedal position 'A' circuit is higher than the allowed maximum. This often points to a short to voltage, an open ground, or a sensor fault. The computer may read the throttle as wide open when it is not.
Typowe objawy
- Check engine light on
- Reduced power / limp mode
- Surging or unexpected high idle
- Hesitation or poor throttle response
- Stalling
Typowe przyczyny
Uporządkowane od najczęstszych do najrzadszych.
- 1Signal wire shorted to voltage or to the reference wire
- 2Faulty throttle/pedal position sensor
- 3Open or high-resistance ground for the sensor
- 4Corroded or damaged connector
- 5Faulty throttle body assembly (electronic throttle)
Co zrobić
Expect possible limp mode and reduced power; drive cautiously and have it diagnosed promptly. A technician should measure the circuit voltages and check for shorts to power and ground faults. Repair the wiring or replace the sensor/throttle body as needed.
Kupujesz auto z kodem P0123?
Zapisany kod usterki może wskazywać na ukryty problem. Zdekoduj VIN, aby bezpłatnie poznać dane auta i oficjalne akcje przywoławcze dotyczące bezpieczeństwa.
Najczęściej zadawane pytania
Co oznacza kod P0123?
The voltage on the throttle or pedal position 'A' circuit is higher than the allowed maximum. This often points to a short to voltage, an open ground, or a sensor fault. The computer may read the throttle as wide open when it is not.
Co powoduje kod P0123?
Najczęstsze przyczyny to: Signal wire shorted to voltage or to the reference wire, Faulty throttle/pedal position sensor, Open or high-resistance ground for the sensor, Corroded or damaged connector, Faulty throttle body assembly (electronic throttle).
Czy można bezpiecznie jechać z P0123?
Zwykle można bezpiecznie przejechać krótki dystans, ale jak najszybciej zleć to sprawdzić.
Jak naprawić kod P0123?
Expect possible limp mode and reduced power; drive cautiously and have it diagnosed promptly. A technician should measure the circuit voltages and check for shorts to power and ground faults. Repair the wiring or replace the sensor/throttle body as needed.
To ogólne informacje, które pomogą Ci zrozumieć kod P0123, a nie zastępstwo dla diagnostyki przez wykwalifikowanego mechanika. Zawsze potwierdź przyczynę, zanim wymienisz części.
Definicje kodów są zgodne ze znormalizowaną listą OBD-II (SAE J2012). CarVinVin jest niezależny i nie jest powiązany z żadnym producentem.