P0135O2 Sensor Heater Circuit (Bank 1, Sensor 1)
Oto co oznacza kod usterki P0135, dlaczego się pojawia i co z nim zrobić.
Układ: Fuel & air metering
Zwykle można bezpiecznie przejechać krótki dystans, ale jak najszybciej zleć to sprawdzić.
Co oznacza P0135
There is a fault in the heater circuit of the upstream oxygen sensor on bank 1. Modern O2 sensors have a built-in heater so they reach operating temperature quickly; if the heater fails, the sensor takes too long to work and the computer cannot trust its readings early on. This is detected as abnormal heater current or resistance.
Typowe objawy
- Check engine light on
- Slightly reduced fuel economy
- Longer time before closed-loop fueling after start
- Possible failed emissions test
- Usually no major driving symptoms
Typowe przyczyny
Uporządkowane od najczęstszych do najrzadszych.
- 1Failed O2 sensor heater element (sensor replacement needed)
- 2Blown fuse for the O2 heater circuit
- 3Open or shorted heater wiring or connector
- 4Corroded sensor connector
- 5Loss of power or ground to the heater circuit
- 6Engine control module/driver fault (rare)
Co zrobić
It is generally safe to drive short distances. Check the O2 heater fuse and wiring first; if those are good, the sensor itself usually needs replacing. Fixing it restores proper warm-up and emissions performance.
Kupujesz auto z kodem P0135?
Zapisany kod usterki może wskazywać na ukryty problem. Zdekoduj VIN, aby bezpłatnie poznać dane auta i oficjalne akcje przywoławcze dotyczące bezpieczeństwa.
Najczęściej zadawane pytania
Co oznacza kod P0135?
There is a fault in the heater circuit of the upstream oxygen sensor on bank 1. Modern O2 sensors have a built-in heater so they reach operating temperature quickly; if the heater fails, the sensor takes too long to work and the computer cannot trust its readings early on. This is detected as abnormal heater current or resistance.
Co powoduje kod P0135?
Najczęstsze przyczyny to: Failed O2 sensor heater element (sensor replacement needed), Blown fuse for the O2 heater circuit, Open or shorted heater wiring or connector, Corroded sensor connector, Loss of power or ground to the heater circuit, Engine control module/driver fault (rare).
Czy można bezpiecznie jechać z P0135?
Zwykle można bezpiecznie przejechać krótki dystans, ale jak najszybciej zleć to sprawdzić.
Jak naprawić kod P0135?
It is generally safe to drive short distances. Check the O2 heater fuse and wiring first; if those are good, the sensor itself usually needs replacing. Fixing it restores proper warm-up and emissions performance.
To ogólne informacje, które pomogą Ci zrozumieć kod P0135, a nie zastępstwo dla diagnostyki przez wykwalifikowanego mechanika. Zawsze potwierdź przyczynę, zanim wymienisz części.
Definicje kodów są zgodne ze znormalizowaną listą OBD-II (SAE J2012). CarVinVin jest niezależny i nie jest powiązany z żadnym producentem.