Przejdź do treści
CarVinVin

Kody usterek

P0731Gear 1 Incorrect Ratio

Oto co oznacza kod usterki P0731, dlaczego się pojawia i co z nim zrobić.

Układ: Transmission

Powaga usterki
Umiarkowana
Czy można jechać z P0731?

Zwykle można bezpiecznie przejechać krótki dystans, ale jak najszybciej zleć to sprawdzić.

Co oznacza P0731

The transmission computer compares engine speed (RPM) to output/vehicle speed in first gear. P0731 means the ratio it measured does not match what first gear should be. In plain terms, the transmission is not delivering the correct first-gear ratio, often because of slipping or a hydraulic/solenoid fault.

Typowe objawy

  • Check Engine Light on
  • Slipping or flaring in first gear
  • Harsh or delayed 1-2 shift
  • Transmission may enter limp/safe mode (limited gears)
  • Higher than normal RPM when pulling away

Typowe przyczyny

Uporządkowane od najczęstszych do najrzadszych.

  1. 1Low or degraded/burnt transmission fluid
  2. 2Worn clutches or bands inside the transmission
  3. 3Faulty or stuck shift solenoid
  4. 4Dirty or stuck valve in the valve body
  5. 5Internal hydraulic leak or low line pressure
  6. 6Failing input/output speed sensor giving wrong readings

Co zrobić

Check the transmission fluid level and condition first; low or burnt fluid is a common trigger. Because this code can indicate internal transmission slipping that gets worse with driving, have it diagnosed promptly by a transmission shop. Avoid hard acceleration until it is checked.

Kupujesz auto z kodem P0731?

Zapisany kod usterki może wskazywać na ukryty problem. Zdekoduj VIN, aby bezpłatnie poznać dane auta i oficjalne akcje przywoławcze dotyczące bezpieczeństwa.

Najczęściej zadawane pytania

Co oznacza kod P0731?

The transmission computer compares engine speed (RPM) to output/vehicle speed in first gear. P0731 means the ratio it measured does not match what first gear should be. In plain terms, the transmission is not delivering the correct first-gear ratio, often because of slipping or a hydraulic/solenoid fault.

Co powoduje kod P0731?

Najczęstsze przyczyny to: Low or degraded/burnt transmission fluid, Worn clutches or bands inside the transmission, Faulty or stuck shift solenoid, Dirty or stuck valve in the valve body, Internal hydraulic leak or low line pressure, Failing input/output speed sensor giving wrong readings.

Czy można bezpiecznie jechać z P0731?

Zwykle można bezpiecznie przejechać krótki dystans, ale jak najszybciej zleć to sprawdzić.

Jak naprawić kod P0731?

Check the transmission fluid level and condition first; low or burnt fluid is a common trigger. Because this code can indicate internal transmission slipping that gets worse with driving, have it diagnosed promptly by a transmission shop. Avoid hard acceleration until it is checked.

To ogólne informacje, które pomogą Ci zrozumieć kod P0731, a nie zastępstwo dla diagnostyki przez wykwalifikowanego mechanika. Zawsze potwierdź przyczynę, zanim wymienisz części.

Definicje kodów są zgodne ze znormalizowaną listą OBD-II (SAE J2012). CarVinVin jest niezależny i nie jest powiązany z żadnym producentem.