P0330Knock Sensor 2 Circuit (Bank 2)

This is the knock sensor circuit fault for bank 2, the side of a V-type engine that does not contain cylinder 1. The knock sensor lets the computer detect engine knock and fine-tune ignition timing. A circuit problem here means the computer cannot trust knock readings on that bank and may retard timing to protect the engine.

ყველაზე გავრცელებული მიზეზებია: Faulty bank 2 knock sensor, Damaged, corroded, or loose wiring or connector, Open or short in the knock sensor circuit, Poor ground connection, Actual engine knock on bank 2, Faulty engine control module (rare).

ჩვეულებრივ უსაფრთხოა მცირე მანძილზე მგზავრობა, მაგრამ მალე გადაამოწმებინეთ.

Short trips are generally safe, but have it diagnosed soon so the engine is not running with reduced timing. The sensor often sits under the intake manifold, so a shop will inspect wiring first and then test the sensor. Make sure no real knock is present before condemning parts.