P0018Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor A)
Ось що означає код несправності P0018, чому він виникає та що з цим робити.
Система: Camshaft / crankshaft timing correlation
Краще не їхати — ця несправність може бути небезпечною або призвести до більших пошкоджень. Перевірте авто негайно.
Що означає P0018
The computer compared the crankshaft position signal to the bank 2 intake camshaft position signal and found they do not align correctly. The intake camshaft on bank 2 is out of sync with the crankshaft, commonly from a stretched timing chain, a VVT fault, or a sensor problem. Severe misalignment can risk engine damage.
Типові симптоми
- Check engine light on
- Rough idle or rough running
- Hard starting or extended cranking
- Timing chain rattle, often on start-up
- Loss of power
- Possible stalling
Типові причини
Від найпоширеніших до найрідкісніших.
- 1Stretched or worn timing chain, guides, or tensioner
- 2Faulty camshaft or crankshaft position sensor
- 3Stuck or faulty VVT/cam actuator from low or dirty oil
- 4Clogged oil passages to the cam phaser
- 5Damaged reluctor/tone wheel
- 6Wiring or connector faults
Що робити
Have it diagnosed promptly, as a misaligned timing chain can cause serious engine damage if it skips or breaks. Check the oil first, but treat any rattle seriously. Minimize driving until a technician confirms the timing components are sound.
Купуєте авто, де з’являється P0018?
Збережений код несправності може вказувати на прихований дефект. Розшифруйте VIN, щоб побачити дані авто та офіційні відкликання з безпеки — безкоштовно.
Поширені запитання
Що означає код P0018?
The computer compared the crankshaft position signal to the bank 2 intake camshaft position signal and found they do not align correctly. The intake camshaft on bank 2 is out of sync with the crankshaft, commonly from a stretched timing chain, a VVT fault, or a sensor problem. Severe misalignment can risk engine damage.
Що спричиняє код P0018?
Найпоширеніші причини: Stretched or worn timing chain, guides, or tensioner, Faulty camshaft or crankshaft position sensor, Stuck or faulty VVT/cam actuator from low or dirty oil, Clogged oil passages to the cam phaser, Damaged reluctor/tone wheel, Wiring or connector faults.
Чи безпечно їхати з P0018?
Краще не їхати — ця несправність може бути небезпечною або призвести до більших пошкоджень. Перевірте авто негайно.
Як усунути код P0018?
Have it diagnosed promptly, as a misaligned timing chain can cause serious engine damage if it skips or breaks. Check the oil first, but treat any rattle seriously. Minimize driving until a technician confirms the timing components are sound.
Це загальна інформація, яка допоможе вам зрозуміти код P0018, а не заміна діагностики кваліфікованим механіком. Завжди підтверджуйте причину, перш ніж міняти деталі.
Визначення кодів відповідають стандартизованому списку OBD-II (SAE J2012). CarVinVin незалежний і не пов’язаний із жодним виробником.