P0102Mass or Volume Air Flow Circuit Low Input
Hier erfahren Sie, was der Fehlercode P0102 bedeutet, warum er auftritt und was Sie dagegen tun können.
System: Fuel & air metering
Kurze Strecken sind meist unbedenklich, lassen Sie es aber bald überprüfen.
Was P0102 bedeutet
The signal coming from the mass airflow (MAF) sensor is lower than it should be for the engine's operating conditions. This usually means the sensor is reading too little airflow, or there is a wiring fault dropping the signal. The computer then under-fuels, which can make the engine run poorly.
Häufige Symptome
- Check engine light on
- Hard starting or no start
- Rough idle or stalling
- Lack of power and hesitation
- Poor fuel economy
Häufige Ursachen
Sortiert von der häufigsten zur seltensten Ursache.
- 1Dirty or contaminated MAF sensor
- 2Faulty MAF sensor
- 3Open or short to ground in the MAF signal wiring
- 4Corroded or loose connector at the MAF sensor
- 5Restricted air filter or blocked intake
- 6Loss of power or ground to the sensor
Was zu tun ist
Check the MAF sensor connector and wiring for damage or corrosion, and clean or test the sensor itself. Confirm the air filter and intake path are not restricted. The car can usually be driven short distances, but have it diagnosed soon as drivability may be affected.
Wollen Sie ein Auto kaufen, das P0102 anzeigt?
Ein gespeicherter Fehlercode kann auf ein verstecktes Problem hindeuten. Entschlüsseln Sie die VIN, um die Fahrzeugdaten und offizielle Sicherheitsrückrufe zu sehen — kostenlos.
Häufig gestellte Fragen
Was bedeutet der Code P0102?
The signal coming from the mass airflow (MAF) sensor is lower than it should be for the engine's operating conditions. This usually means the sensor is reading too little airflow, or there is a wiring fault dropping the signal. The computer then under-fuels, which can make the engine run poorly.
Was verursacht den Code P0102?
Die häufigsten Ursachen sind: Dirty or contaminated MAF sensor, Faulty MAF sensor, Open or short to ground in the MAF signal wiring, Corroded or loose connector at the MAF sensor, Restricted air filter or blocked intake, Loss of power or ground to the sensor.
Ist die Weiterfahrt mit P0102 sicher?
Kurze Strecken sind meist unbedenklich, lassen Sie es aber bald überprüfen.
Wie behebt man den Code P0102?
Check the MAF sensor connector and wiring for damage or corrosion, and clean or test the sensor itself. Confirm the air filter and intake path are not restricted. The car can usually be driven short distances, but have it diagnosed soon as drivability may be affected.
Dies sind allgemeine Informationen, die Ihnen helfen, den Code P0102 zu verstehen, und kein Ersatz für eine Diagnose durch eine qualifizierte Werkstatt. Bestätigen Sie immer die Ursache, bevor Sie Teile austauschen.
Die Code-Definitionen folgen der standardisierten OBD-II-Liste (SAE J2012). CarVinVin ist unabhängig und mit keinem Hersteller verbunden.