P0012"A" Camshaft Position - Timing Over-Retarded (Bank 1)
Hier erfahren Sie, was der Fehlercode P0012 bedeutet, warum er auftritt und was Sie dagegen tun können.
System: Variable valve timing (VVT)
Kurze Strecken sind meist unbedenklich, lassen Sie es aber bald überprüfen.
Was P0012 bedeutet
The computer detected that the intake ("A") camshaft on bank 1 is timed too far retarded compared to what it commanded. The variable valve timing system is not moving the camshaft to the correct position, usually due to an oil control or actuator fault.
Häufige Symptome
- Check engine light on
- Rough idle
- Loss of power and poor acceleration
- Reduced fuel economy
- Possible engine noise on start-up
Häufige Ursachen
Sortiert von der häufigsten zur seltensten Ursache.
- 1Faulty or stuck camshaft oil-control (VVT) solenoid
- 2Low or dirty engine oil
- 3Clogged oil passages or filter screen to the actuator
- 4Worn camshaft phaser/actuator
- 5Damaged wiring or connector at the solenoid
- 6Timing chain wear affecting cam position
Was zu tun ist
Check the oil level and condition first, as dirty or low oil commonly causes this. Then have a technician test the camshaft actuator solenoid, oil flow, and timing. Short trips are usually fine, but address it soon to restore proper performance.
Wollen Sie ein Auto kaufen, das P0012 anzeigt?
Ein gespeicherter Fehlercode kann auf ein verstecktes Problem hindeuten. Entschlüsseln Sie die VIN, um die Fahrzeugdaten und offizielle Sicherheitsrückrufe zu sehen — kostenlos.
Häufig gestellte Fragen
Was bedeutet der Code P0012?
The computer detected that the intake ("A") camshaft on bank 1 is timed too far retarded compared to what it commanded. The variable valve timing system is not moving the camshaft to the correct position, usually due to an oil control or actuator fault.
Was verursacht den Code P0012?
Die häufigsten Ursachen sind: Faulty or stuck camshaft oil-control (VVT) solenoid, Low or dirty engine oil, Clogged oil passages or filter screen to the actuator, Worn camshaft phaser/actuator, Damaged wiring or connector at the solenoid, Timing chain wear affecting cam position.
Ist die Weiterfahrt mit P0012 sicher?
Kurze Strecken sind meist unbedenklich, lassen Sie es aber bald überprüfen.
Wie behebt man den Code P0012?
Check the oil level and condition first, as dirty or low oil commonly causes this. Then have a technician test the camshaft actuator solenoid, oil flow, and timing. Short trips are usually fine, but address it soon to restore proper performance.
Dies sind allgemeine Informationen, die Ihnen helfen, den Code P0012 zu verstehen, und kein Ersatz für eine Diagnose durch eine qualifizierte Werkstatt. Bestätigen Sie immer die Ursache, bevor Sie Teile austauschen.
Die Code-Definitionen folgen der standardisierten OBD-II-Liste (SAE J2012). CarVinVin ist unabhängig und mit keinem Hersteller verbunden.