P0131O2 Sensor Circuit Low Voltage (Bank 1, Sensor 1)
Hier erfahren Sie, was der Fehlercode P0131 bedeutet, warum er auftritt und was Sie dagegen tun können.
System: Fuel & air metering
Kurze Strecken sind meist unbedenklich, lassen Sie es aber bald überprüfen.
Was P0131 bedeutet
The upstream oxygen sensor on bank 1 is reporting a steady low voltage, which the computer reads as a constantly lean exhaust (too much oxygen) or a circuit problem. This sensor helps balance the fuel mixture, so a stuck-low signal can make the computer add extra fuel to compensate. The cause can be the sensor itself, its wiring, or an actual lean condition.
Häufige Symptome
- Check engine light on
- Reduced fuel economy
- Possible rough idle or hesitation
- Failed emissions test
- Sometimes no obvious symptoms
Häufige Ursachen
Sortiert von der häufigsten zur seltensten Ursache.
- 1Failed upstream oxygen sensor
- 2Exhaust leak before the sensor letting in fresh air
- 3Short to ground or open in the sensor signal wire
- 4Corroded or loose sensor connector
- 5Genuine lean condition (vacuum leak, low fuel pressure)
- 6Engine control module fault (rare)
Was zu tun ist
It is usually safe to drive short distances. Have the O2 sensor wiring and an exhaust leak check done, and rule out vacuum leaks or low fuel pressure before replacing the sensor. Replacing the upstream sensor often clears it if the wiring is good.
Wollen Sie ein Auto kaufen, das P0131 anzeigt?
Ein gespeicherter Fehlercode kann auf ein verstecktes Problem hindeuten. Entschlüsseln Sie die VIN, um die Fahrzeugdaten und offizielle Sicherheitsrückrufe zu sehen — kostenlos.
Häufig gestellte Fragen
Was bedeutet der Code P0131?
The upstream oxygen sensor on bank 1 is reporting a steady low voltage, which the computer reads as a constantly lean exhaust (too much oxygen) or a circuit problem. This sensor helps balance the fuel mixture, so a stuck-low signal can make the computer add extra fuel to compensate. The cause can be the sensor itself, its wiring, or an actual lean condition.
Was verursacht den Code P0131?
Die häufigsten Ursachen sind: Failed upstream oxygen sensor, Exhaust leak before the sensor letting in fresh air, Short to ground or open in the sensor signal wire, Corroded or loose sensor connector, Genuine lean condition (vacuum leak, low fuel pressure), Engine control module fault (rare).
Ist die Weiterfahrt mit P0131 sicher?
Kurze Strecken sind meist unbedenklich, lassen Sie es aber bald überprüfen.
Wie behebt man den Code P0131?
It is usually safe to drive short distances. Have the O2 sensor wiring and an exhaust leak check done, and rule out vacuum leaks or low fuel pressure before replacing the sensor. Replacing the upstream sensor often clears it if the wiring is good.
Dies sind allgemeine Informationen, die Ihnen helfen, den Code P0131 zu verstehen, und kein Ersatz für eine Diagnose durch eine qualifizierte Werkstatt. Bestätigen Sie immer die Ursache, bevor Sie Teile austauschen.
Die Code-Definitionen folgen der standardisierten OBD-II-Liste (SAE J2012). CarVinVin ist unabhängig und mit keinem Hersteller verbunden.