P0021"A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 2)

The computer detected that the intake ("A") camshaft on bank 2 is timed too far advanced, or its timing does not match the command. The variable valve timing system is stuck or not responding properly, usually because of an oil flow or actuator issue on that bank.

Ամենատարածված պատճառներն են՝ Stuck or faulty intake camshaft oil-control (VVT) solenoid on bank 2, Low or dirty engine oil, Clogged oil passages or screen feeding the actuator, Worn or stuck camshaft phaser/actuator, Wiring or connector problems, Timing chain wear affecting cam timing։

Սովորաբար անվտանգ է կարճ տարածությունների վրա վարել, սակայն շուտով ստուգել տվեք։

Check the engine oil level and condition first, as low or dirty oil often causes this. Then have a technician test the bank 2 camshaft solenoid and verify the timing. Short trips are usually fine, but repair it soon.