P0018Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor A)
Ecco cosa significa il codice di errore P0018, perché si verifica e cosa fare.
Sistema: Camshaft / crankshaft timing correlation
Evita di guidare — questo guasto può essere pericoloso o causare ulteriori danni. Fallo controllare subito.
Cosa significa P0018
The computer compared the crankshaft position signal to the bank 2 intake camshaft position signal and found they do not align correctly. The intake camshaft on bank 2 is out of sync with the crankshaft, commonly from a stretched timing chain, a VVT fault, or a sensor problem. Severe misalignment can risk engine damage.
Sintomi comuni
- Check engine light on
- Rough idle or rough running
- Hard starting or extended cranking
- Timing chain rattle, often on start-up
- Loss of power
- Possible stalling
Cause comuni
Elencate dalla più comune alla meno comune.
- 1Stretched or worn timing chain, guides, or tensioner
- 2Faulty camshaft or crankshaft position sensor
- 3Stuck or faulty VVT/cam actuator from low or dirty oil
- 4Clogged oil passages to the cam phaser
- 5Damaged reluctor/tone wheel
- 6Wiring or connector faults
Cosa fare
Have it diagnosed promptly, as a misaligned timing chain can cause serious engine damage if it skips or breaks. Check the oil first, but treat any rattle seriously. Minimize driving until a technician confirms the timing components are sound.
Stai comprando un’auto che mostra P0018?
Un codice di errore memorizzato può indicare un problema nascosto. Decodifica il VIN per vedere i dettagli dell’auto e i richiami di sicurezza ufficiali — gratis.
Domande frequenti
Cosa significa il codice P0018?
The computer compared the crankshaft position signal to the bank 2 intake camshaft position signal and found they do not align correctly. The intake camshaft on bank 2 is out of sync with the crankshaft, commonly from a stretched timing chain, a VVT fault, or a sensor problem. Severe misalignment can risk engine damage.
Quali sono le cause del codice P0018?
Le cause più comuni sono: Stretched or worn timing chain, guides, or tensioner, Faulty camshaft or crankshaft position sensor, Stuck or faulty VVT/cam actuator from low or dirty oil, Clogged oil passages to the cam phaser, Damaged reluctor/tone wheel, Wiring or connector faults.
È sicuro guidare con P0018?
Evita di guidare — questo guasto può essere pericoloso o causare ulteriori danni. Fallo controllare subito.
Come si risolve il codice P0018?
Have it diagnosed promptly, as a misaligned timing chain can cause serious engine damage if it skips or breaks. Check the oil first, but treat any rattle seriously. Minimize driving until a technician confirms the timing components are sound.
Queste sono informazioni generali per aiutarti a capire il codice P0018, non un sostituto della diagnosi di un meccanico qualificato. Conferma sempre la causa prima di sostituire i componenti.
Le definizioni dei codici seguono l’elenco standardizzato OBD-II (SAE J2012). CarVinVin è indipendente e non è affiliata ad alcun produttore.