P0102Mass or Volume Air Flow Circuit Low Input
Ecco cosa significa il codice di errore P0102, perché si verifica e cosa fare.
Sistema: Fuel & air metering
Di solito è sicuro guidare per brevi tragitti, ma fallo controllare al più presto.
Cosa significa P0102
The signal coming from the mass airflow (MAF) sensor is lower than it should be for the engine's operating conditions. This usually means the sensor is reading too little airflow, or there is a wiring fault dropping the signal. The computer then under-fuels, which can make the engine run poorly.
Sintomi comuni
- Check engine light on
- Hard starting or no start
- Rough idle or stalling
- Lack of power and hesitation
- Poor fuel economy
Cause comuni
Elencate dalla più comune alla meno comune.
- 1Dirty or contaminated MAF sensor
- 2Faulty MAF sensor
- 3Open or short to ground in the MAF signal wiring
- 4Corroded or loose connector at the MAF sensor
- 5Restricted air filter or blocked intake
- 6Loss of power or ground to the sensor
Cosa fare
Check the MAF sensor connector and wiring for damage or corrosion, and clean or test the sensor itself. Confirm the air filter and intake path are not restricted. The car can usually be driven short distances, but have it diagnosed soon as drivability may be affected.
Stai comprando un’auto che mostra P0102?
Un codice di errore memorizzato può indicare un problema nascosto. Decodifica il VIN per vedere i dettagli dell’auto e i richiami di sicurezza ufficiali — gratis.
Domande frequenti
Cosa significa il codice P0102?
The signal coming from the mass airflow (MAF) sensor is lower than it should be for the engine's operating conditions. This usually means the sensor is reading too little airflow, or there is a wiring fault dropping the signal. The computer then under-fuels, which can make the engine run poorly.
Quali sono le cause del codice P0102?
Le cause più comuni sono: Dirty or contaminated MAF sensor, Faulty MAF sensor, Open or short to ground in the MAF signal wiring, Corroded or loose connector at the MAF sensor, Restricted air filter or blocked intake, Loss of power or ground to the sensor.
È sicuro guidare con P0102?
Di solito è sicuro guidare per brevi tragitti, ma fallo controllare al più presto.
Come si risolve il codice P0102?
Check the MAF sensor connector and wiring for damage or corrosion, and clean or test the sensor itself. Confirm the air filter and intake path are not restricted. The car can usually be driven short distances, but have it diagnosed soon as drivability may be affected.
Queste sono informazioni generali per aiutarti a capire il codice P0102, non un sostituto della diagnosi di un meccanico qualificato. Conferma sempre la causa prima di sostituire i componenti.
Le definizioni dei codici seguono l’elenco standardizzato OBD-II (SAE J2012). CarVinVin è indipendente e non è affiliata ad alcun produttore.