P0335Crankshaft Position Sensor A Circuit
Ecco cosa significa il codice di errore P0335, perché si verifica e cosa fare.
Sistema: Crankshaft / camshaft position
Evita di guidare — questo guasto può essere pericoloso o causare ulteriori danni. Fallo controllare subito.
Cosa significa P0335
The crankshaft position sensor tells the engine computer exactly where the engine's crankshaft is and how fast it is turning. The computer needs this to time spark and fuel. This code means the computer sees a problem in that sensor's circuit, which can cause the engine to run badly or not start at all.
Sintomi comuni
- Check engine light on
- Hard starting or no-start
- Engine stalling, especially when hot
- Rough running or misfire feel
- Intermittent loss of power while driving
- Tachometer dropping out or reading erratically
Cause comuni
Elencate dalla più comune alla meno comune.
- 1Faulty crankshaft position sensor
- 2Damaged, corroded, or loose wiring or connector
- 3Open or short in the sensor circuit
- 4Damaged reluctor/tone ring on the crankshaft
- 5Heat-related sensor failure (works cold, fails hot)
- 6Faulty engine control module (rare)
Cosa fare
Have this diagnosed promptly because the car may stall or fail to start, which is unsafe if it happens in traffic. Avoid long trips until it is fixed. A shop will check the sensor's wiring and signal and inspect the tone ring before replacing the sensor.
Stai comprando un’auto che mostra P0335?
Un codice di errore memorizzato può indicare un problema nascosto. Decodifica il VIN per vedere i dettagli dell’auto e i richiami di sicurezza ufficiali — gratis.
Domande frequenti
Cosa significa il codice P0335?
The crankshaft position sensor tells the engine computer exactly where the engine's crankshaft is and how fast it is turning. The computer needs this to time spark and fuel. This code means the computer sees a problem in that sensor's circuit, which can cause the engine to run badly or not start at all.
Quali sono le cause del codice P0335?
Le cause più comuni sono: Faulty crankshaft position sensor, Damaged, corroded, or loose wiring or connector, Open or short in the sensor circuit, Damaged reluctor/tone ring on the crankshaft, Heat-related sensor failure (works cold, fails hot), Faulty engine control module (rare).
È sicuro guidare con P0335?
Evita di guidare — questo guasto può essere pericoloso o causare ulteriori danni. Fallo controllare subito.
Come si risolve il codice P0335?
Have this diagnosed promptly because the car may stall or fail to start, which is unsafe if it happens in traffic. Avoid long trips until it is fixed. A shop will check the sensor's wiring and signal and inspect the tone ring before replacing the sensor.
Queste sono informazioni generali per aiutarti a capire il codice P0335, non un sostituto della diagnosi di un meccanico qualificato. Conferma sempre la causa prima di sostituire i componenti.
Le definizioni dei codici seguono l’elenco standardizzato OBD-II (SAE J2012). CarVinVin è indipendente e non è affiliata ad alcun produttore.