P0102Mass or Volume Air Flow Circuit Low Input
Вот что означает код ошибки P0102, почему он появляется и что с ним делать.
Система: Fuel & air metering
Обычно можно проехать небольшое расстояние, но осмотрите автомобиль как можно скорее.
Что означает P0102
The signal coming from the mass airflow (MAF) sensor is lower than it should be for the engine's operating conditions. This usually means the sensor is reading too little airflow, or there is a wiring fault dropping the signal. The computer then under-fuels, which can make the engine run poorly.
Частые симптомы
- Check engine light on
- Hard starting or no start
- Rough idle or stalling
- Lack of power and hesitation
- Poor fuel economy
Частые причины
Перечислены от наиболее к наименее частым.
- 1Dirty or contaminated MAF sensor
- 2Faulty MAF sensor
- 3Open or short to ground in the MAF signal wiring
- 4Corroded or loose connector at the MAF sensor
- 5Restricted air filter or blocked intake
- 6Loss of power or ground to the sensor
Что делать
Check the MAF sensor connector and wiring for damage or corrosion, and clean or test the sensor itself. Confirm the air filter and intake path are not restricted. The car can usually be driven short distances, but have it diagnosed soon as drivability may be affected.
Покупаете автомобиль с кодом P0102?
Сохранённый код ошибки может указывать на скрытую проблему. Расшифруйте VIN, чтобы узнать характеристики автомобиля и официальные отзывы по безопасности — бесплатно.
Часто задаваемые вопросы
Что означает код P0102?
The signal coming from the mass airflow (MAF) sensor is lower than it should be for the engine's operating conditions. This usually means the sensor is reading too little airflow, or there is a wiring fault dropping the signal. The computer then under-fuels, which can make the engine run poorly.
Из-за чего появляется код P0102?
Самые частые причины: Dirty or contaminated MAF sensor, Faulty MAF sensor, Open or short to ground in the MAF signal wiring, Corroded or loose connector at the MAF sensor, Restricted air filter or blocked intake, Loss of power or ground to the sensor.
Безопасно ли ездить с P0102?
Обычно можно проехать небольшое расстояние, но осмотрите автомобиль как можно скорее.
Как устранить код P0102?
Check the MAF sensor connector and wiring for damage or corrosion, and clean or test the sensor itself. Confirm the air filter and intake path are not restricted. The car can usually be driven short distances, but have it diagnosed soon as drivability may be affected.
Это общая информация, которая поможет понять код P0102, а не замена диагностике у квалифицированного механика. Всегда подтверждайте причину, прежде чем менять детали.
Определения кодов соответствуют стандартизированному списку OBD-II (SAE J2012). CarVinVin независим и не связан ни с одним производителем.