U0121Lost Communication With Anti-Lock Brake System (ABS) Control Module
Вот что означает код ошибки U0121, почему он появляется и что с ним делать.
Система: Network / module communication
Лучше не ездить — эта неисправность может быть опасной или привести к большему повреждению. Проверьте автомобиль немедленно.
Что означает U0121
A module on the communication network has stopped receiving messages from the ABS (anti-lock brake) control module. In practice, the car can no longer communicate with the system that manages anti-lock braking and usually traction/stability control. Normal braking generally still works, but the safety-assist features (ABS, traction control, stability control) are typically disabled. It is often caused by lost power to the ABS module or a network wiring problem.
Частые симптомы
- ABS warning light on
- Traction control / stability control (ESC) light on
- Check engine light may be on
- ABS and stability features disabled
- Speedometer may be inaccurate or dead on some vehicles
Частые причины
Перечислены от наиболее к наименее частым.
- 1Loss of power or ground to the ABS module (blown fuse, corroded connector)
- 2Damaged, broken, or shorted CAN bus wiring to the ABS module
- 3Corroded, loose, or backed-out connector pins at the ABS module
- 4Another module disrupting the communication bus
- 5Failed or faulty ABS control module
Что делать
Have this checked soon, because ABS, traction control, and stability control are likely disabled even though basic braking still works. Drive gently and allow extra stopping distance, especially in rain, ice, or hard braking, until it is repaired. A technician will check ABS module power, grounds, and the network wiring before replacing parts.
Покупаете автомобиль с кодом U0121?
Сохранённый код ошибки может указывать на скрытую проблему. Расшифруйте VIN, чтобы узнать характеристики автомобиля и официальные отзывы по безопасности — бесплатно.
Часто задаваемые вопросы
Что означает код U0121?
A module on the communication network has stopped receiving messages from the ABS (anti-lock brake) control module. In practice, the car can no longer communicate with the system that manages anti-lock braking and usually traction/stability control. Normal braking generally still works, but the safety-assist features (ABS, traction control, stability control) are typically disabled. It is often caused by lost power to the ABS module or a network wiring problem.
Из-за чего появляется код U0121?
Самые частые причины: Loss of power or ground to the ABS module (blown fuse, corroded connector), Damaged, broken, or shorted CAN bus wiring to the ABS module, Corroded, loose, or backed-out connector pins at the ABS module, Another module disrupting the communication bus, Failed or faulty ABS control module.
Безопасно ли ездить с U0121?
Лучше не ездить — эта неисправность может быть опасной или привести к большему повреждению. Проверьте автомобиль немедленно.
Как устранить код U0121?
Have this checked soon, because ABS, traction control, and stability control are likely disabled even though basic braking still works. Drive gently and allow extra stopping distance, especially in rain, ice, or hard braking, until it is repaired. A technician will check ABS module power, grounds, and the network wiring before replacing parts.
Это общая информация, которая поможет понять код U0121, а не замена диагностике у квалифицированного механика. Всегда подтверждайте причину, прежде чем менять детали.
Определения кодов соответствуют стандартизированному списку OBD-II (SAE J2012). CarVinVin независим и не связан ни с одним производителем.