P0138O2 Sensor Circuit High Voltage (Bank 1, Sensor 2)
Ecco cosa significa il codice di errore P0138, perché si verifica e cosa fare.
Sistema: Catalyst / emissions
Di solito è sicuro guidare per brevi tragitti, ma fallo controllare al più presto.
Cosa significa P0138
The downstream oxygen sensor on bank 1 (after the catalytic converter) is showing a steady high voltage, which is read as very little oxygen in the exhaust or a circuit fault. This rear sensor mainly monitors the catalytic converter, so the problem usually does not affect drivability. Causes range from a bad sensor or wiring short to connector corrosion.
Sintomi comuni
- Check engine light on
- Usually no change in driving
- Possible failed emissions test
- Catalyst monitor may not complete
- Rarely affects fuel economy
Cause comuni
Elencate dalla più comune alla meno comune.
- 1Failed downstream oxygen sensor
- 2Short to voltage in the sensor wiring
- 3Water or corrosion in the connector causing a short
- 4Contaminated sensor
- 5Genuine rich exhaust condition
- 6Engine control module fault (rare)
Cosa fare
It is generally safe to drive short distances. Have the rear O2 sensor connector and wiring inspected for shorts or corrosion, and replace the sensor if it has failed. If the engine is actually running rich, address that cause too.
Stai comprando un’auto che mostra P0138?
Un codice di errore memorizzato può indicare un problema nascosto. Decodifica il VIN per vedere i dettagli dell’auto e i richiami di sicurezza ufficiali — gratis.
Domande frequenti
Cosa significa il codice P0138?
The downstream oxygen sensor on bank 1 (after the catalytic converter) is showing a steady high voltage, which is read as very little oxygen in the exhaust or a circuit fault. This rear sensor mainly monitors the catalytic converter, so the problem usually does not affect drivability. Causes range from a bad sensor or wiring short to connector corrosion.
Quali sono le cause del codice P0138?
Le cause più comuni sono: Failed downstream oxygen sensor, Short to voltage in the sensor wiring, Water or corrosion in the connector causing a short, Contaminated sensor, Genuine rich exhaust condition, Engine control module fault (rare).
È sicuro guidare con P0138?
Di solito è sicuro guidare per brevi tragitti, ma fallo controllare al più presto.
Come si risolve il codice P0138?
It is generally safe to drive short distances. Have the rear O2 sensor connector and wiring inspected for shorts or corrosion, and replace the sensor if it has failed. If the engine is actually running rich, address that cause too.
Queste sono informazioni generali per aiutarti a capire il codice P0138, non un sostituto della diagnosi di un meccanico qualificato. Conferma sempre la causa prima di sostituire i componenti.
Le definizioni dei codici seguono l’elenco standardizzato OBD-II (SAE J2012). CarVinVin è indipendente e non è affiliata ad alcun produttore.