Vai al contenuto
CarVinVin

Codici di errore

P0140O2 Sensor Circuit No Activity Detected (Bank 1, Sensor 2)

Ecco cosa significa il codice di errore P0140, perché si verifica e cosa fare.

Sistema: Catalyst / emissions

Gravità
Bassa
Si può guidare con P0140?

Di solito è sicuro guidare per brevi tragitti, ma fallo controllare al più presto.

Cosa significa P0140

The engine computer sees no signal activity from the downstream oxygen sensor on bank 1 — its voltage stays flat instead of responding to exhaust changes. This rear sensor checks the catalytic converter, so the car usually drives normally, but the computer cannot verify the converter is working. The sensor is often dead, not heating, or its circuit is open.

Sintomi comuni

  • Check engine light on
  • No noticeable change in driving
  • Failed emissions test
  • Catalyst readiness monitor will not complete
  • Possible minor fuel economy effect

Cause comuni

Elencate dalla più comune alla meno comune.

  1. 1Failed downstream oxygen sensor
  2. 2Open in the sensor signal or heater circuit
  3. 3Blown O2 heater fuse
  4. 4Disconnected or corroded sensor connector
  5. 5Exhaust leak near the rear sensor
  6. 6Engine control module fault (rare)

Cosa fare

It is generally safe to drive short distances. Check the rear O2 sensor connector, wiring, and heater fuse; a no-activity reading usually means the sensor needs replacing. Verify circuit continuity before installing a new sensor.

Stai comprando un’auto che mostra P0140?

Un codice di errore memorizzato può indicare un problema nascosto. Decodifica il VIN per vedere i dettagli dell’auto e i richiami di sicurezza ufficiali — gratis.

Domande frequenti

Cosa significa il codice P0140?

The engine computer sees no signal activity from the downstream oxygen sensor on bank 1 — its voltage stays flat instead of responding to exhaust changes. This rear sensor checks the catalytic converter, so the car usually drives normally, but the computer cannot verify the converter is working. The sensor is often dead, not heating, or its circuit is open.

Quali sono le cause del codice P0140?

Le cause più comuni sono: Failed downstream oxygen sensor, Open in the sensor signal or heater circuit, Blown O2 heater fuse, Disconnected or corroded sensor connector, Exhaust leak near the rear sensor, Engine control module fault (rare).

È sicuro guidare con P0140?

Di solito è sicuro guidare per brevi tragitti, ma fallo controllare al più presto.

Come si risolve il codice P0140?

It is generally safe to drive short distances. Check the rear O2 sensor connector, wiring, and heater fuse; a no-activity reading usually means the sensor needs replacing. Verify circuit continuity before installing a new sensor.

Queste sono informazioni generali per aiutarti a capire il codice P0140, non un sostituto della diagnosi di un meccanico qualificato. Conferma sempre la causa prima di sostituire i componenti.

Le definizioni dei codici seguono l’elenco standardizzato OBD-II (SAE J2012). CarVinVin è indipendente e non è affiliata ad alcun produttore.