Zum Inhalt springen
CarVinVin

Fehlercodes

P0137O2 Sensor Circuit Low Voltage (Bank 1, Sensor 2)

Hier erfahren Sie, was der Fehlercode P0137 bedeutet, warum er auftritt und was Sie dagegen tun können.

System: Catalyst / emissions

Schweregrad
Gering
Können Sie mit P0137 weiterfahren?

Kurze Strecken sind meist unbedenklich, lassen Sie es aber bald überprüfen.

Was P0137 bedeutet

The downstream oxygen sensor on bank 1 (after the catalytic converter) is reporting a steady low voltage, read as too much oxygen in the exhaust or a circuit problem. Because this rear sensor mostly checks the catalytic converter, the fault usually does not change how the car drives. The cause is often the sensor, its wiring, or an exhaust leak.

Häufige Symptome

  • Check engine light on
  • Typically no noticeable driving change
  • Possible failed emissions test
  • Catalyst monitor may not complete
  • Rarely minor fuel economy change

Häufige Ursachen

Sortiert von der häufigsten zur seltensten Ursache.

  1. 1Failed downstream oxygen sensor
  2. 2Exhaust leak before or near the rear sensor
  3. 3Open or short to ground in the signal wire
  4. 4Corroded or loose sensor connector
  5. 5Wiring damage from heat or chafing
  6. 6Engine control module fault (rare)

Was zu tun ist

It is usually safe to drive short distances. Have the rear O2 sensor wiring and exhaust checked for leaks; replacing the downstream sensor often clears it. Repair exhaust leaks first since they commonly cause a low reading.

Wollen Sie ein Auto kaufen, das P0137 anzeigt?

Ein gespeicherter Fehlercode kann auf ein verstecktes Problem hindeuten. Entschlüsseln Sie die VIN, um die Fahrzeugdaten und offizielle Sicherheitsrückrufe zu sehen — kostenlos.

Häufig gestellte Fragen

Was bedeutet der Code P0137?

The downstream oxygen sensor on bank 1 (after the catalytic converter) is reporting a steady low voltage, read as too much oxygen in the exhaust or a circuit problem. Because this rear sensor mostly checks the catalytic converter, the fault usually does not change how the car drives. The cause is often the sensor, its wiring, or an exhaust leak.

Was verursacht den Code P0137?

Die häufigsten Ursachen sind: Failed downstream oxygen sensor, Exhaust leak before or near the rear sensor, Open or short to ground in the signal wire, Corroded or loose sensor connector, Wiring damage from heat or chafing, Engine control module fault (rare).

Ist die Weiterfahrt mit P0137 sicher?

Kurze Strecken sind meist unbedenklich, lassen Sie es aber bald überprüfen.

Wie behebt man den Code P0137?

It is usually safe to drive short distances. Have the rear O2 sensor wiring and exhaust checked for leaks; replacing the downstream sensor often clears it. Repair exhaust leaks first since they commonly cause a low reading.

Dies sind allgemeine Informationen, die Ihnen helfen, den Code P0137 zu verstehen, und kein Ersatz für eine Diagnose durch eine qualifizierte Werkstatt. Bestätigen Sie immer die Ursache, bevor Sie Teile austauschen.

Die Code-Definitionen folgen der standardisierten OBD-II-Liste (SAE J2012). CarVinVin ist unabhängig und mit keinem Hersteller verbunden.