P0123Throttle/Pedal Position Sensor/Switch "A" Circuit High
Voici ce que signifie le code défaut P0123, pourquoi il apparaît et que faire à son sujet.
Système: Fuel & air metering
Généralement sans danger sur de courtes distances, mais faites-le contrôler rapidement.
Ce que signifie P0123
The voltage on the throttle or pedal position 'A' circuit is higher than the allowed maximum. This often points to a short to voltage, an open ground, or a sensor fault. The computer may read the throttle as wide open when it is not.
Symptômes courants
- Check engine light on
- Reduced power / limp mode
- Surging or unexpected high idle
- Hesitation or poor throttle response
- Stalling
Causes courantes
Classées de la plus courante à la moins courante.
- 1Signal wire shorted to voltage or to the reference wire
- 2Faulty throttle/pedal position sensor
- 3Open or high-resistance ground for the sensor
- 4Corroded or damaged connector
- 5Faulty throttle body assembly (electronic throttle)
Que faire
Expect possible limp mode and reduced power; drive cautiously and have it diagnosed promptly. A technician should measure the circuit voltages and check for shorts to power and ground faults. Repair the wiring or replace the sensor/throttle body as needed.
Vous achetez une voiture qui affiche P0123 ?
Un code défaut enregistré peut révéler un problème caché. Décodez le VIN pour voir les détails de la voiture et les rappels de sécurité officiels — gratuitement.
Questions fréquentes
Que signifie le code P0123 ?
The voltage on the throttle or pedal position 'A' circuit is higher than the allowed maximum. This often points to a short to voltage, an open ground, or a sensor fault. The computer may read the throttle as wide open when it is not.
Quelles sont les causes du code P0123 ?
Les causes les plus courantes sont : Signal wire shorted to voltage or to the reference wire, Faulty throttle/pedal position sensor, Open or high-resistance ground for the sensor, Corroded or damaged connector, Faulty throttle body assembly (electronic throttle).
Peut-on rouler sans danger avec le code P0123 ?
Généralement sans danger sur de courtes distances, mais faites-le contrôler rapidement.
Comment corriger le code P0123 ?
Expect possible limp mode and reduced power; drive cautiously and have it diagnosed promptly. A technician should measure the circuit voltages and check for shorts to power and ground faults. Repair the wiring or replace the sensor/throttle body as needed.
Ce sont des informations générales pour vous aider à comprendre le code P0123, et non un substitut au diagnostic d’un mécanicien qualifié. Confirmez toujours la cause avant de remplacer des pièces.
Les définitions des codes suivent la liste OBD-II normalisée (SAE J2012). CarVinVin est indépendant et n’est affilié à aucun constructeur.