P0336Crankshaft Position Sensor A Circuit Range/Performance
Voici ce que signifie le code défaut P0336, pourquoi il apparaît et que faire à son sujet.
Système: Crankshaft / camshaft position
Évitez de rouler — ce défaut peut être dangereux ou causer davantage de dommages. Faites-le contrôler sans attendre.
Ce que signifie P0336
The crankshaft position sensor is producing a signal, but it does not look right to the engine computer. The computer expects a clean, regular pattern as the crank turns. An irregular or out-of-range pattern can come from a bad sensor, a damaged trigger ring, or wiring trouble, and it can cause stalling or hard starting.
Symptômes courants
- Check engine light on
- Engine stalling or surging
- Hard starting or intermittent no-start
- Rough running or hesitation
- Tachometer reading erratically
Causes courantes
Classées de la plus courante à la moins courante.
- 1Faulty crankshaft position sensor
- 2Damaged or contaminated reluctor/tone ring teeth
- 3Wiring or connector problems causing a noisy signal
- 4Excessive sensor air gap or loose sensor mounting
- 5Metal debris on the sensor tip
- 6Faulty engine control module (rare)
Que faire
Get this looked at promptly, since the engine may stall or be hard to start. Limit driving until it is repaired. A technician will scope the crank signal and inspect the tone ring and wiring rather than just swapping the sensor.
Vous achetez une voiture qui affiche P0336 ?
Un code défaut enregistré peut révéler un problème caché. Décodez le VIN pour voir les détails de la voiture et les rappels de sécurité officiels — gratuitement.
Questions fréquentes
Que signifie le code P0336 ?
The crankshaft position sensor is producing a signal, but it does not look right to the engine computer. The computer expects a clean, regular pattern as the crank turns. An irregular or out-of-range pattern can come from a bad sensor, a damaged trigger ring, or wiring trouble, and it can cause stalling or hard starting.
Quelles sont les causes du code P0336 ?
Les causes les plus courantes sont : Faulty crankshaft position sensor, Damaged or contaminated reluctor/tone ring teeth, Wiring or connector problems causing a noisy signal, Excessive sensor air gap or loose sensor mounting, Metal debris on the sensor tip, Faulty engine control module (rare).
Peut-on rouler sans danger avec le code P0336 ?
Évitez de rouler — ce défaut peut être dangereux ou causer davantage de dommages. Faites-le contrôler sans attendre.
Comment corriger le code P0336 ?
Get this looked at promptly, since the engine may stall or be hard to start. Limit driving until it is repaired. A technician will scope the crank signal and inspect the tone ring and wiring rather than just swapping the sensor.
Ce sont des informations générales pour vous aider à comprendre le code P0336, et non un substitut au diagnostic d’un mécanicien qualifié. Confirmez toujours la cause avant de remplacer des pièces.
Les définitions des codes suivent la liste OBD-II normalisée (SAE J2012). CarVinVin est indépendant et n’est affilié à aucun constructeur.