P2104Throttle Actuator Control System - Forced Idle
Voici ce que signifie le code défaut P2104, pourquoi il apparaît et que faire à son sujet.
Système: Throttle control
Évitez de rouler — ce défaut peut être dangereux ou causer davantage de dommages. Faites-le contrôler sans attendre.
Ce que signifie P2104
The computer found a problem with the electronic throttle control system and responded by forcing the engine to idle as a safety measure. This means the car will not accelerate normally and is limited to idle speed to keep it from accelerating unsafely. It is usually set alongside other throttle-related codes.
Symptômes courants
- Check engine light on
- Engine stuck at or near idle / no acceleration
- Severe reduced power / limp mode
- Rough idle or stalling
- Throttle warning light
Causes courantes
Classées de la plus courante à la moins courante.
- 1Faulty throttle body / throttle actuator control motor
- 2Throttle or accelerator pedal position sensor fault
- 3Damaged, corroded, or loose wiring/connectors in the throttle system
- 4Open or short in throttle control circuits
- 5Poor power or ground to the throttle body
- 6ECM fault (less common)
Que faire
This is a safety-protection mode that severely limits power, so have it diagnosed promptly by a professional. Driving is unsafe in traffic because the car may not accelerate, so minimize driving and consider towing if it will not move normally. A technician will read all related codes and inspect the throttle body, pedal sensor, and wiring.
Vous achetez une voiture qui affiche P2104 ?
Un code défaut enregistré peut révéler un problème caché. Décodez le VIN pour voir les détails de la voiture et les rappels de sécurité officiels — gratuitement.
Questions fréquentes
Que signifie le code P2104 ?
The computer found a problem with the electronic throttle control system and responded by forcing the engine to idle as a safety measure. This means the car will not accelerate normally and is limited to idle speed to keep it from accelerating unsafely. It is usually set alongside other throttle-related codes.
Quelles sont les causes du code P2104 ?
Les causes les plus courantes sont : Faulty throttle body / throttle actuator control motor, Throttle or accelerator pedal position sensor fault, Damaged, corroded, or loose wiring/connectors in the throttle system, Open or short in throttle control circuits, Poor power or ground to the throttle body, ECM fault (less common).
Peut-on rouler sans danger avec le code P2104 ?
Évitez de rouler — ce défaut peut être dangereux ou causer davantage de dommages. Faites-le contrôler sans attendre.
Comment corriger le code P2104 ?
This is a safety-protection mode that severely limits power, so have it diagnosed promptly by a professional. Driving is unsafe in traffic because the car may not accelerate, so minimize driving and consider towing if it will not move normally. A technician will read all related codes and inspect the throttle body, pedal sensor, and wiring.
Ce sont des informations générales pour vous aider à comprendre le code P2104, et non un substitut au diagnostic d’un mécanicien qualifié. Confirmez toujours la cause avant de remplacer des pièces.
Les définitions des codes suivent la liste OBD-II normalisée (SAE J2012). CarVinVin est indépendant et n’est affilié à aucun constructeur.