P2135Throttle/Pedal Position Sensor/Switch "A"/"B" Voltage Correlation
Voici ce que signifie le code défaut P2135, pourquoi il apparaît et que faire à son sujet.
Système: Fuel & air metering
Généralement sans danger sur de courtes distances, mais faites-le contrôler rapidement.
Ce que signifie P2135
Electronic throttle systems use two throttle position sensors that must agree with each other. The computer found that the A and B throttle position signals do not correlate as they should. Because it cannot trust the throttle reading, it often drops engine power for safety.
Symptômes courants
- Check engine light on
- Reduced power / limp mode (very common)
- Hesitation or erratic throttle response
- Unstable or surging idle
- Possible stalling
Causes courantes
Classées de la plus courante à la moins courante.
- 1Faulty throttle position sensor / throttle body assembly
- 2Connector or wiring problem causing one signal to read wrong
- 3Corroded, loose, or backed-out terminals at the throttle body
- 4Reference voltage or ground fault to the sensors
- 5Throttle plate binding affecting sensor agreement
Que faire
This commonly forces limp mode with sharply reduced power, so drive cautiously and get prompt diagnosis. A technician should compare both sensor signals and inspect the connector and wiring at the throttle body. Repair faulty wiring/connectors or replace the throttle body, then perform any required relearn.
Vous achetez une voiture qui affiche P2135 ?
Un code défaut enregistré peut révéler un problème caché. Décodez le VIN pour voir les détails de la voiture et les rappels de sécurité officiels — gratuitement.
Questions fréquentes
Que signifie le code P2135 ?
Electronic throttle systems use two throttle position sensors that must agree with each other. The computer found that the A and B throttle position signals do not correlate as they should. Because it cannot trust the throttle reading, it often drops engine power for safety.
Quelles sont les causes du code P2135 ?
Les causes les plus courantes sont : Faulty throttle position sensor / throttle body assembly, Connector or wiring problem causing one signal to read wrong, Corroded, loose, or backed-out terminals at the throttle body, Reference voltage or ground fault to the sensors, Throttle plate binding affecting sensor agreement.
Peut-on rouler sans danger avec le code P2135 ?
Généralement sans danger sur de courtes distances, mais faites-le contrôler rapidement.
Comment corriger le code P2135 ?
This commonly forces limp mode with sharply reduced power, so drive cautiously and get prompt diagnosis. A technician should compare both sensor signals and inspect the connector and wiring at the throttle body. Repair faulty wiring/connectors or replace the throttle body, then perform any required relearn.
Ce sont des informations générales pour vous aider à comprendre le code P2135, et non un substitut au diagnostic d’un mécanicien qualifié. Confirmez toujours la cause avant de remplacer des pièces.
Les définitions des codes suivent la liste OBD-II normalisée (SAE J2012). CarVinVin est indépendant et n’est affilié à aucun constructeur.