Aller au contenu
CarVinVin

Codes défauts

P0020"A" Camshaft Position Actuator Circuit (Bank 2)

Voici ce que signifie le code défaut P0020, pourquoi il apparaît et que faire à son sujet.

Système: Variable valve timing (VVT)

Gravité
Modérée
Peut-on rouler avec le code P0020 ?

Généralement sans danger sur de courtes distances, mais faites-le contrôler rapidement.

Ce que signifie P0020

The engine computer found an electrical problem in the circuit controlling the intake ("A") camshaft timing actuator on bank 2. This oil-control valve adjusts intake valve timing on that cylinder bank. The computer sees a wiring fault or a solenoid that is not responding as commanded.

Symptômes courants

  • Check engine light on
  • Rough or unstable idle
  • Reduced power or hesitation
  • Slightly worse fuel economy
  • Sometimes only the warning light is noticed

Causes courantes

Classées de la plus courante à la moins courante.

  1. 1Faulty intake camshaft oil-control (VVT) solenoid on bank 2
  2. 2Low or dirty engine oil
  3. 3Damaged wiring or poor connector contact
  4. 4Clogged oil passages to the actuator
  5. 5Failed actuator/phaser
  6. 6Engine control module fault (rare)

Que faire

Check the engine oil level and condition first, then have the bank 2 camshaft solenoid and wiring tested. Short-distance driving is generally safe, but get a proper diagnosis soon to avoid drivability problems.

Vous achetez une voiture qui affiche P0020 ?

Un code défaut enregistré peut révéler un problème caché. Décodez le VIN pour voir les détails de la voiture et les rappels de sécurité officiels — gratuitement.

Questions fréquentes

Que signifie le code P0020 ?

The engine computer found an electrical problem in the circuit controlling the intake ("A") camshaft timing actuator on bank 2. This oil-control valve adjusts intake valve timing on that cylinder bank. The computer sees a wiring fault or a solenoid that is not responding as commanded.

Quelles sont les causes du code P0020 ?

Les causes les plus courantes sont : Faulty intake camshaft oil-control (VVT) solenoid on bank 2, Low or dirty engine oil, Damaged wiring or poor connector contact, Clogged oil passages to the actuator, Failed actuator/phaser, Engine control module fault (rare).

Peut-on rouler sans danger avec le code P0020 ?

Généralement sans danger sur de courtes distances, mais faites-le contrôler rapidement.

Comment corriger le code P0020 ?

Check the engine oil level and condition first, then have the bank 2 camshaft solenoid and wiring tested. Short-distance driving is generally safe, but get a proper diagnosis soon to avoid drivability problems.

Ce sont des informations générales pour vous aider à comprendre le code P0020, et non un substitut au diagnostic d’un mécanicien qualifié. Confirmez toujours la cause avant de remplacer des pièces.

Les définitions des codes suivent la liste OBD-II normalisée (SAE J2012). CarVinVin est indépendant et n’est affilié à aucun constructeur.