Aller au contenu
CarVinVin

Codes défauts

P0160O2 Sensor Circuit No Activity Detected (Bank 2 Sensor 2)

Voici ce que signifie le code défaut P0160, pourquoi il apparaît et que faire à son sujet.

Système: Fuel & air metering (O2 sensor)

Gravité
Faible
Peut-on rouler avec le code P0160 ?

Généralement sans danger sur de courtes distances, mais faites-le contrôler rapidement.

Ce que signifie P0160

The downstream oxygen sensor on bank 2 (located after the catalytic converter) showed no changing activity in its signal. This sensor mainly checks how well the catalytic converter is working. A flat, inactive signal means the computer cannot monitor that sensor.

Symptômes courants

  • Check engine light on
  • Usually no change in how the car drives
  • May fail an emissions test
  • Possible minor effect on fuel trim correction

Causes courantes

Classées de la plus courante à la moins courante.

  1. 1Failed or aged downstream O2 sensor on bank 2
  2. 2Wiring or connector fault (open circuit) in the sensor signal
  3. 3Corroded or disconnected sensor connector
  4. 4Exhaust leak near the sensor
  5. 5ECM/PCM fault (rare)

Que faire

It is generally safe to drive short distances since this is mainly an emissions-monitoring code. Have a technician check the sensor wiring and connector, then replace the downstream sensor if it is dead; fix before an emissions test.

Vous achetez une voiture qui affiche P0160 ?

Un code défaut enregistré peut révéler un problème caché. Décodez le VIN pour voir les détails de la voiture et les rappels de sécurité officiels — gratuitement.

Questions fréquentes

Que signifie le code P0160 ?

The downstream oxygen sensor on bank 2 (located after the catalytic converter) showed no changing activity in its signal. This sensor mainly checks how well the catalytic converter is working. A flat, inactive signal means the computer cannot monitor that sensor.

Quelles sont les causes du code P0160 ?

Les causes les plus courantes sont : Failed or aged downstream O2 sensor on bank 2, Wiring or connector fault (open circuit) in the sensor signal, Corroded or disconnected sensor connector, Exhaust leak near the sensor, ECM/PCM fault (rare).

Peut-on rouler sans danger avec le code P0160 ?

Généralement sans danger sur de courtes distances, mais faites-le contrôler rapidement.

Comment corriger le code P0160 ?

It is generally safe to drive short distances since this is mainly an emissions-monitoring code. Have a technician check the sensor wiring and connector, then replace the downstream sensor if it is dead; fix before an emissions test.

Ce sont des informations générales pour vous aider à comprendre le code P0160, et non un substitut au diagnostic d’un mécanicien qualifié. Confirmez toujours la cause avant de remplacer des pièces.

Les définitions des codes suivent la liste OBD-II normalisée (SAE J2012). CarVinVin est indépendant et n’est affilié à aucun constructeur.